Current Danuser Post-Drivers Hammer Post Driver Series

2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21013

2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21013

Swipe to View More

  • Year 2023
  • Make Danuser
  • Model Hammer Post Driver Series
Shop Danuser Pre-Owned
Product Details Specifications Photos
2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21013

2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21013

  • Year 2023
  • Manufacturer Danuser
  • Model Name Hammer Post Driver Series
  • Trim Name Euro/Global Quick Attach 21013
  • Generic Type (Primary) Electric

2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21013

Achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth

The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20° left or right. The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.

Features may include:

Grapple
  • Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load into the machine, and drive it in the ground without leaving the skid-steer seat.
Tilt
  • Tilt the option allows up to 20" in each direction.
Additionsl Weight Kit
  • The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.
Mounts
  • Skid-Steer, Tractor Front-End Loader Skid-Steer, and Euro/Global are standard mount options. Backhoe & excavator custom mounts are available by submitting the form below the Gallery section.

Operational

Operating Conditions Impact Force: 49,000 lb. | Impact Energy: 1,026 ft.-lb. | Tractor Requirements: 75 HP Minimum

Hydraulics

Hydraulic Flow Hydraulic Requirements: 1,500 - 3,000 PSI; 12 - 30 GPM

Dimensions

Dimensions Tilt (left or right) (degrees): 20° | Post Dimensions: T-post to Railroad tie
Length of Stroke (inches): 40"
Width Maximum Post Width (inches): 8.5" x 9.25"
Overall Height 64"
Overall Width 27.5"
Overall Length 46"

Weights

Weight Hammer Weight: 300 lb. | Machine Weight: 1,010 lb.

Features

Features Strokes per Minute: 35

Product Photography