2023 AGI X2 10 Scissor Lift 1083
- Year 2023
- Make AGI
- Model X2 10 Scissor Lift
2023 AGI X2 10 Scissor Lift 1083
2023 AGI X2 10 Scissor Lift 1083
Features may include:
- New open discharge spout decreases horsepower requirements
- Aircraft cable trussing
- Wide standing axles
- Strong scissor-lift frame (63'-83')
Engine
Engine Power
Required (With Dry Wheat): 65-75 hp
PTO
PTO Type
Shaft: 35E constant velocity with one shear bolt
Drivetrain
Sprocket Chain
Hardened tooth sprocket with HD #60 chain
Wheels & Tires
Tires, Rear Specification
16" (40.6 cm) TRF
Hydraulics
Hydraulic Type
Lift: 4" (10.2 cm) single acting cylinder
Maximum Pressure
Required To Raise Auger: 1600 psi (110.3 bar)
Dimensions
Dimensions
Wheel Tread: 132" - 180" (335.3 - 457.2 cm)
Height
Lowered A/B/C/D: 11'-1" (3.4 m) / 6'-9" (2.1 m) / 42'-3" (12.9 m) / 42'-3" (12.9 m) | Halfway A/B/C/D: 35'-4" (10.8 m) / 18'-1" (5.5 m) / 40'-1" (12.2 m) / 38'-5" (11.7 m) | Raised A/B/C/D: 55'-3" (16.8 m) / 28'-6" (8.7 m) / 33'-11" (10.3 m) / 31'-1" (9.5 m)
Hopper Width
Low Profile: 40" (101.6 cm)
Length
Low Profile Hopper: 60" (152.4 cm)
Transport Height
(18" Hitch): 13' (4 m)
Capacities
Features
Parking Jack: 2,000 lbs (907.2 kg) side wind
Features
Construction Material
Tube Gauge: 12 ga | Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Main Flighting: 9" (22.9 cm) OD x 7 ga stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm (Reinforced Flight): Hopper and inclined tube feature 10 ga ribbon weld, Wear Edge TechnologyTM | Flighting Shaft: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection | Tube Trussing: 3/8" (1 cm) aircraft type galvanized steel cable | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) scissor lift | Axle: 3" (7.6 cm) x 6" (15.2 cm) tubing
Bearing Hanger Type
Upper: 2" (5.1 cm) taper roller bearing assembly | Lower: 1 ½" (3.8 cm) pillow block greaseable ball bearing
Hub Type
6-bolt agricultural type